• <u id="ivggj"><small id="ivggj"></small></u>
      <source id="ivggj"></source>
    <rp id="ivggj"><menuitem id="ivggj"></menuitem></rp>
    1. <b id="ivggj"></b>

    2. <video id="ivggj"></video>
      歡迎來到機床門戶網,注冊會員、發布信息,尋找商機一網搞定

      讓賣家找上門

      《發布采購單》

      客服熱線: 0532-84624992 總訪問量: 9590819 產品數量: 988 商家數量: 1838

      快捷方式:發布信息| 收藏公司

      伊之密壓鑄機

      產品/服務:
      有效期至: 長期有效
      最后更新: 2017-06-27 15:01
      單價:
      320000.00元/ 臺
      立即詢價

      (發貨期限:自買家付款之日起 天內發貨)

      • VIP指數:    0 [第1年]
      • 認證信息:
      •   通過認證
      • 所在地區:浙江
    3.  
    4. 收藏本公司 人氣:1112
      • 詳細說明
      • 規格參數
      • 聯系方式
       隆華壓鑄機-34年品質保證



      未標題-1-副本_02

      LH標準系列參數表(400T)

      LH series of standard parameter table (400 t)

      項目ITEMS

      單位

      參數Specification

      系統工作壓力  HYDRAULIC WORKING PRESSURE

      MPa

      14

      鎖模力CLAMPING FORCE              

      KN

      4000

      格林柱內距SPACE BETWEEN TIE BARS

      mm

      620*620

      導杠直徑Tie Bar Diameter

      mm

      ¢125

      鎖模行程DIE OPENING STROKE

      mm

      450

      壓射力(增壓)INJECTION FORCE(intensify)                 

      KN

      410

      壓射頭推出距離

      Plungerlaunch distance

      mm

      200

      壓射位置Injection position

      mm

      0  --  175

      沖頭直徑PLUNGER DIAMETER

      mm

      ¢60----¢80

      射料行程INJECTION STROKE

      mm

      500

      鑄造壓力(增壓)

      Casting pressure (intensify)

      MPa

      141/104/80

      壓射室法蘭凸出定板高度

      Casting Fiange Protrusion

      mm

      12

      壓射室法蘭直徑

      Casting Fiange Diameter

      mm

      130

      最大鑄造面積(40Mpa)MAX CASTING AREA UNDER 40Mpa

      CM2

      1008

      射料量(鋁)lnjection Weight(Al)

      Kg

      5

      模具厚度(最小—最大)Die Height(Min--Max)

      mm

      300~750

      頂出力EJECTOR FORCE

      KN

      180

      頂出行程EJECTOR STROKE

      mm

      145

      電機功率Motor Capacity

      Kw

      18.5

      外型尺寸(長*寬*高)Machine Dimensions (L*W*H)

      m

      7.3*2*2.8

      機器吊裝參考重量重量Referential Machine Weight For Uplifting

      T

      16.5

      油箱容量Oil Tank Capacity

      L

      1000

      我們有權做任何技術改進而不另行通知

      WE reserve the right to make any technical improvement without further notice

       

       

                                                                        隆華壓鑄機主要性能及特點;

      Primary performance and features of Longhua Die Casting machines

       

       

      1,雙比例控制(壓力,流量電動調節,具備多級壓力和速度控制以及低壓合模保護功能)。

      • Double proportional control (electric regulation of pressure and flow, with a multi-level pressure and speed control as well as low pressure die close protection functions).

      2,雙回路設計(壓射和增壓獨立設計,互不影響,零故障)。

      • Dual circuit design (air injection and pressure building are separately designed without mutual interference and fault occurrence).

      3,四級(多段)壓射系統:

      3, four-stage (multi-stage) injection system:

      A,最高速度>8M/s(2000T以上6M/s),可有效控制填充時間及壓鑄件成型效果,獨有剎車及勻加速壓射功能,有效防止毛邊,壓射工藝更靈活.

      • maximum speed> 8M/s (6M / s for those more than 2000T), which can effectively control the filling time and casting formation, in addition to unique braking and uniform acceleration injection function that can effectively prevent flash and allow more flexible injection process.

      B,最低速度0.1—0.7M/s,可進行精確控制,避免空氣進入引起藏氣問題。

      • Minimum speed 0.1-0.7M/s, which can be precisely controlled to prevent air invasion from causing air trap.

      C,增壓建壓時間≤15 M/s,可以按照工藝要求,改變增壓速度,對壓鑄件加強密度而不會引起產品變型.

      • Pressure building time≤15 M/s, which allows to change pressure building speed according to process requirements, strengthening the casting density without causing product distortion.

      D,空循環時間縮短15%以上,油泵流量增大20%以上,冷卻器冷卻能力增大100%以上,產品成品率提高100%,生產效率比過去提高20%以上。

      • Dry cycle time is reduced by more than 15%; Oil pump flow increases by more than 20%; Cooler capacity is enhanced by more than 100%; Proportion of conforming finished products rise by 100%; productivity is improved by 20% as compared to the past.

      4,國際優良PLC人機界面控制系統,壓鑄產品數據存儲及監控功能,出現異常,及時報警保檢,杜絕大批量殘次品現象。

      • The internationally-favorable PLC man-machine interface control system, casting product data storage and monitoring capabilities, timely alarm in case of abnormality, and elimination of large quantities of defective products.

      5,獨有的靜,動雙抽芯性能,確保高精度,高難度產品一次成型。

      • Unique static and dynamic performance with dual core-pulling devices ensures one-time formation of precise, complicated products.

      6,壓射系統采用歐式拉桿結構,中心及偏心多位置壓射選擇,方便調節,精度高,適用于多品種復雜的模具。

      • The injection system uses European draw-bar structure with a variety of choices for center and eccentric injection positions that provide easy adjustment, high precision, and applicability to various complex molds.

      7,1600T以上大型壓鑄機采用液壓抽杠裝置,安全快速更換大型模具。 

      • Large-scale die-casting machine above 1600T uses hydraulic pumping means which allows safe and fast replacement of large molds.

      8,獨立的特快鎖模系統,獨有液壓驅動調節容模厚度結構,耐沖擊,壽命長,實現快速生產,班產量提高15%以上。

      • Independent quick clamping system and unique hydraulic driven gear-type mold height adjusting mechanism are resistant to impact, providing longer service life and fast production, with an output on a shift increased by over 15%.

      9,科學的液氮安裝工藝,保證配合精度,延長壽命。

      • Liquid nitrogen super low temperature installation method ensures precision and prolongs service life of toggle parts.

      10,優質的鑄鋼(球墨鑄鐵)模板,良好的剛性與耐磨性,采用有限元分析技術校核設計,應力分布合理,合模精度高。

      • High quality, high rigidity and wear resistant casting platen adopts finite element analysis design that brings even stress distribution, little distortion and precise mold clamping.

      11,中央電動潤滑系統,定時定量潤滑機絞,提高使用壽命。

      • Electric central lubrication system provides scheduled, quantitative lubrication and improves service life.

      12,電器及液壓元件采用歐日及中國臺灣名牌。

      • Electrical and hydraulic components are well-known brands made in Europe, Japan and China Taiwan.

      13,壓鑄單元島設計理念,預留多種智能先進的周邊設備接口和軟件配套。

      Die-casting unit island design provides various interfaces and software packages for a variety of advanced intelligent peripheral devices.

       

       

       

      这里有精品视频2在线观看-制服丝袜卡通动漫亚洲日韩-ai明星换脸十八禁网站-国产欧美日韩一区二区图片-香港三日本三级少妇三级66-高清日本中文字幕DVD-亚洲欧美在线制服丝袜国产